I used durarock for the backer. I used primer throughout the whole process. I have done some small sample pieces with this and checked for moisture penetration. None. The primer is essentially skinning over creating a moisture barrier. After coloring I used a 2 part urethane applying 2 coats within a 12 hour window. Hope this helps.
Eric its no problem at all to get it 2" with the sprayer I was going to call you this evening. I am still here with Thom in Nebraska and we are adding on to the studio. I hope this helps, let me know if you need anything else I will be glad to help.
Nathan Brownell
I used durarock for the backer. I used primer throughout the whole process. I have done some small sample pieces with this and checked for moisture penetration. None. The primer is essentially skinning over creating a moisture barrier. After coloring I used a 2 part urethane applying 2 coats within a 12 hour window. Hope this helps.
Mar 5, 2010
Nathan Brownell
I Have been using tru pacs for my carving. For the skims I have been making my own.
Mar 7, 2010
Eric Kelley
Mar 8, 2010
victor arias
Jul 18, 2010
Tima
Jul 21, 2010
Jody Smith
Oct 25, 2010
Jody Smith
Dec 6, 2010
Christian Maucieri
I used a medium density foam block. I carved and then overlayed.
Dec 10, 2010
Nathan Giffin Vertical Artisans
Apr 20, 2011