Tru Pac/Walttools/Don's Discussions (33)

Discussions Replied To (29) Replies Latest Activity

"Michael.  Powder release can be a PIA, especially indoors. I think the benefits outw…"

Tru Pac/Walttools/Don replied Feb 12, 2015 to Foo foo options

1 Feb 12, 2015
Reply by Tru Pac/Walttools/Don

"Steve, when you get a chance, give me a call.  I am out this week but have my phone…"

Tru Pac/Walttools/Don replied Oct 27, 2014 to ALL CRACKED UP!

3 Oct 27, 2014
Reply by Tru Pac/Walttools/Don

"Jeff is right.  That offers good protection. You can also use a waterproofing agent…"

Tru Pac/Walttools/Don replied Oct 7, 2014 to waterproofing

3 Oct 7, 2014
Reply by william grix

"PAP is polyaspartic.  Very hardy stuff.  Jim has you in a good direction.  You can g…"

Tru Pac/Walttools/Don replied Apr 18, 2014 to Exterior countertop sealer recommendations?

4 Apr 18, 2014
Reply by Tru Pac/Walttools/Don

"Ugh, dreaded shrink.  refer to this FAQ.  It applies to the vertical mixes in genera…"

Tru Pac/Walttools/Don replied Apr 17, 2014 to Dry cracking

4 Apr 17, 2014
Reply by Tru Pac/Walttools/Don

"Brain check out OPTION 1  Acrithane.  indoor or out.  Non yellow, very durable.  Not…"

Tru Pac/Walttools/Don replied Apr 17, 2014 to Exterior countertop sealer recommendations?

4 Apr 18, 2014
Reply by Tru Pac/Walttools/Don

"Deb, Nathan hit it on the head.  There are many options out there.  Some artists sti…"

Tru Pac/Walttools/Don replied Apr 20, 2013 to coloring techniques

4 Apr 20, 2013
Reply by Tru Pac/Walttools/Don

"Thanks, scammers are everywhere.  You can pretty much get a bad feel for them instan…"

Tru Pac/Walttools/Don replied Apr 1, 2013 to BEWARE !!!!!!!!!!!!!!!!!!!! Scam in VA !!!!!!!!!!!

1 Apr 1, 2013
Reply by Tru Pac/Walttools/Don

"George, it may be."

Tru Pac/Walttools/Don replied Oct 11, 2012 to Vertical Carving Mixture Design - Non Brandname

38 Mar 24, 2015
Reply by nathan trevor

"George, making your own OR getting a good ad pak should cost no more than 2.25 per s…"

Tru Pac/Walttools/Don replied Oct 11, 2012 to Vertical Carving Mixture Design - Non Brandname

38 Mar 24, 2015
Reply by nathan trevor

RSS

© 2020   Created by Nathan Giffin Vertical Artisans.   Powered by

Badges  |  Report an Issue  |  Terms of Service

free counters