Hi there, wondering what’s the best method for proper structural integrity for a vertical foam retaining wall to anchor it etc, wall will be about 3 ft high, any tips and help would be appreciated,
Rebar down into the ground vertically and pieces running back horizontal into the hill with cement anchors?
Thanks in advance for any tips

Views: 113

Reply to This

Replies to This Discussion

I'm at a disadvantage with retaining walls but there have been several made with foam over the last several years that seem to be working well. Footings seem to be key and back pinning with structure coat works well too. keeping the weight off the wall with layered geo mesh is another tactic that can be used.

Reply to Discussion

RSS

© 2020   Created by Nathan Giffin Vertical Artisans.   Powered by

Badges  |  Report an Issue  |  Terms of Service

free counters