Comment by Paul on February 15, 2011 at 1:17pm

how did you do the bullnose like effects?

Comment by Eric Kelley on February 15, 2011 at 2:02pm

Lee what is the name of material you are using in shows

Comment by Lee Woolsey on February 16, 2011 at 11:13am

Paul: The bullnose was created by ripping wooden handrail material in half, the gluing it in place with liquid-nails adhesive and a bunch of of hefty screws. Then coating it with the rest.

 

Eric: I use the Acrylic Modified Cement products from Concrete Coatings, Inc. (http://concretecoatingsinc.com/), sealed with their UV Shield Epoxy product.

Comment by Lee Woolsey on February 16, 2011 at 11:14am

In this picture, I also did the floor, and the countertop.

Comment by Eric Kelley on February 16, 2011 at 2:22pm

Lee can you buy the product from them how did you get grout joints

Comment by Lee Woolsey on February 16, 2011 at 3:12pm

CCI's site has information on products, and what you may have to do to purchase them.

 

The applications in these pictures are applied in layers, after the substrate is installed and moisture treated, a colored base 'skim' coat is applied, after the skim is dried and smoothed, the pattern is layed out using a high strength pattern tape, then another layer of material is applied, when that has set-up the tape is "pulled" revealing the tile/grout pattern (with realistic change in material depth). Epoxy is applied over everything to create a non-pourous finish which works excellent for shower/baths!

Comment