I have purchased some tru-pac and have already prepped my area for this product. I mixed product according to instrutional video. Having a hard time spreading the product, it is somewhat hard and heavy. Added a litlle more water and made it somewhat easier, but it is not pliable like the video shows it to be. I am at 7000 feet and altitude may have something to do with it. I added 3 gallons of water instead of 2.75 because it was not really spreadable with the lower content of water.  should I add even more water? Need some help, I am doing my bathroom and have stopped after the first bag to get some advice from the pros.

Views: 585

Reply to This

Replies to This Discussion

hey donnie, if you want to try my mix, call me. 3144869606. I have a very sticky and workable mix. I have people who can tell you from there experience how it works. Please call me and we can talk about it..
FYI,  A good carving mix isn't supposed to spread, its made to plop on thick and stay put.  :)
Good point jeff. It should also stick and be easy to work and close up.

Hey Donnie, nice to see you have found some time to finally get started on your project after a few months.  Must have had a busy summer so far, good for you!  Altitude should really have no appreciable effect on the mix(or any vertical mix really). When mixed properly you should be able to easily form up a wall in your large mixing pail with the mix and it holds nicely. It should go up on your scratch coated wall easily in large handfuls that very easily smooth out with your pool trowel.  The troweled surface is creamy and smooth and will remain that way for some time. Three gallons of water is the upper limit when using the right mortar.  That changes when using alternative mortar types as will the overall properties of the mix.

Give us a call tomorrow to go over specifics and we can get you in the right direction.  Each pac is individually batched to avoid common large blender issues with vertical mixes so there is even a minute chance that something was off in your test bag.  1 of 3400 this season is a slight chance for sure!!!!

I would like to thank all for the comments and advice. Seems the problem was all me. I got this clarified by Don at Walt Tools. I used 80 pounds of mortar instead of 60. Sometimes am so stupid, please don't tell my wife I said that.

 

Again, to all who responded thank you. I am gonna go back and hit again and will post results soon.

Reply to Discussion

RSS

© 2024   Created by Nathan Giffin Vertical Artisans.   Powered by

Badges  |  Report an Issue  |  Terms of Service

free counters